High Quality Spillway Gate Used in Hydropower Station

Product Description

1. Retaining water: inflated the air bladder, it will support the gate panel stand up, and realize retaining water.
2. Overflow: when the water level higher than the gate panel, the water flow and floater will pass on the gate panel. The air bladder will not destroy because of the gate panel protection.
3. Adjust the dam height: through adjust the inflated air pressure, to achieve the purpose of adjust the support angle of the gate panel, and finally control the water level.
4. Collapse: deflate the compressed air in the air bladder, the gate will collapse. The gate panel and air bag will next to the riverbed, the support system is more safer under the gate panel cover.

Modular design means that very long spans can be installed

Single components can easily be replaced if damaged

Steel panels protect the air bladders from damage

Can be operated at any height from fully inflated to fully deflated

Independent operation of different gate sections is possible

Installation is straightforward. The inflation/deflation system is intuitive and operation can be performed by any competent technician following a short time training.

Simple, effective, and environmentally-friendly water retention system .

Hydroelectric Power, Irrigation, Flood Control, Water Supply, Water Cooling, Separation of Fresh and Sea Water, Navigation Channels, Recreational, Ground Water Recharging, Urban Regeneration.

Gate Panel
Material: stainless steel, carbon steel
Size: 5m or 6m per unit
Structure: made of steel panel above 16mm thickness, arc, reinforced ribs on the surface
Corrosion protection: thermal spray zinc and seal coating or polyurea material.

Air Bladder
Material: Air bladder is made of tyre fabrics and special rubber.
Performances: W.P. 0.07-0.20MPa, designed pressure 1.0MPa, designed safety factor 8-10 times, out layer EPDM, aging resistant over 30 years.

Control System
Intelligent control system functions:
1. real-time dynamic display of operation status
2. intelligent fault alarm, easy for repair.
3. one key start-stop, simple operation
4. intelligent data analysis, optimize the operation and management.
5. intelligent PLC could realize the data transmission and local control.
6. monitoring the running status by mobile App is available.
7. remote monitoring could realize the unmanned control.
8. manual and automatic dual control.

Yantai Sunny Rubber Co ., Ltd ., established in 2005, is located in Zone C ( Songshan ), Qixia Economic Development Zone , Shandong Province . The company covers an area of 65 acres and has 22000 square meters of factory areas . It is a high - tech enterprise integrating the R & D , production and sales of filter belt , conveyor belt and inflatable rubber dam , as well as the project design , construction , installation and service of pneumatic spillway gate ( steel rubber gate ). The products are widely used in river regulation , water conservancy and hydropower , dredging , urban landscape , river closure and water storage , agricultural irrigation and other fields . Since the company established , it has adhered to the road of relying on technological innovation to promote the development of enterprises . Through the combination of independent innovation and introduction , digestion , absorption and re - innovation , the company has continuously developed new products , improved the scientific and technological content and added value of products , and reached the international advanced level in product quality . The company has 39 valid patents , including 12 invention patents ,27 utility model patents ,3 trademarks and 3 software copyrights .

Hot Tags: high quality spillway gate used in hydropower station, China, manufacturers, suppliers, factory, customized, Water Filled Rubber Dams, Water Filled Rubber Flood Control Dams, Water Inflated Rubber Dam